Home » Electrical, News, Solar » Tapping into 200 volts positive of free, unlimited and unmetered pure electrical energy.

Tapping into 200 volts positive of free, unlimited and unmetered pure electrical energy.

Homemade omnidirectional antenna for long range wifi broadcasting or EM energy harnessing At full power, long-haul trucker CB’s had a transmitting and receiving range of up to 4 miles A 49? whip attached to the top of a coil increased the range from 7 to 10 miles.

Homemade omnidirectional antenna for long range wifi broadcasting or EM energy harnessing
At full power, long-haul trucker CB’s had a transmitting and receiving range of up to 4 miles
A 49? whip attached to the top of a coil increased the range from 7 to 10 miles.

Lightning is absolute proof that free electrical energy is all around us.  The average lightning bolt contains a billion volts at 3,000 amps, or 3 billion kilowatts of power, enough energy to power a major city like Toronto Ontario Canada, for months.

 

Physicists, oil and gas companies and your governments all know that six feet (2 meters) above the ground (above head height) the air is charged with more than 200 volts positive in respect to the ground.  Three feet (1 meter) off the ground the air is charged with 100 volts positive of free electrical energy.  In comparison, your electrical outlets and home appliances are all powered with 120 volts positive and you car battery has a charged of just 12 volts positive.  That 200 volts + charged air is a source of free, unlimited, unmetered and carbon-free electrical energy.   The energy is electromagnetic (EM) energy.  It can and has already been tapped into by World renowned scientists such as Nikola Tesla and Henry Moray.   Both tapped into this infinite supply of pure, zero emission electrical energy using a simple antenna.

 

The CN Tower, the Eiffel Tower, the Washington Monument, all of the Egyptian pyramids and the new One World Trade Center are all antennas.  All are capable of harnessing this free unlimited positively charged electrical energy.

 

The Egyptian Pyramids were actually built as electrical power generating and wireless transmitting power plants.  The capstone of the pyramids were built and placed atop the pyramids to function as a receiving and transmitting antenna and the base of the pyramids were built with sandstone (a quartz crystal electrical conductor) to store the harnessed electrical energy – to function as a capacitor.

 

Great Pyramid of Giza is 139 m high.
How much free electrical energy can be harnessed at its top if there is 100 volts +/m?

 

The sandstone (arenite) blocks used to build the pyramids were composed of crystal quartz and/or feldspar which are extremely high electrical conductors and the small amount of metal on the capstone allowed for maximum power generation and transmission. Also, the Giza Plateau where the pyramids stand was specifically chosen as the construction sites because the site is full of underground water channels.

 

The pyramids were built above limestone layers that have spaces between them that are full of flowing (flux) water. These special layers of rock called aquifers transmit electricity upward as they carry underground water to the surface. The high volume flow (flux) of the River Nile that passes through these aquifers produces an electric current. This is known as physio-electricity. The pyramids were built to harness, store (capacitor), and transmit this electricity wirelessly.

 

In 1901 Nikola Tesla began constructing the Wardenclyffe Tower (Tesla Tower). He understood ancient technology and set out to reeducate the World by demonstrating what the Egyptians knew and successfully built over 4000 years ago. If the Egyptians were to apply an insulating casing around the pyramids and reinstalled a capstone antenna (plated with an electricity conducting and transmitting metal like silver) their pyramids would once again harness, store and transmit wirelessly this free and unlimited electromagnetic energy. Even though they are thousands of years old they are still able to function today as electrical power generating power plants. Their main structure is fully intact.

 

 

Over 80 years ago Nikola Tesla utilized a  6-foot vertical antenna rod and tapped into this free and infinite source of energy and powered a 80-horsepower alternating-current electric motor that he installed in a car.  Tesla was so successful in tapping into this free energy source that the electrical power harnessed was sufficient enough to power the electric motor and drive a converted (gasoline to electric) Pierce-Arrow at speeds of 90 m.p.h.

 

In 1932 (81 years ago) Dr Moray also successfully tapped into this free and infinite source of energy using a simple long wire antenna.  A long piece of insulated wire acts as an antenna. The very cheap long wire antenna captures electromagnetic energy.

 

An antenna is nothing more than a transducer that converts free electromagnetic (EM) energy into alternating current (AC electrical power) or vice-versa. There are two basic types: the receiving antenna, which intercepts free EM energy (RF) and delivers the AC current to electronic equipment (radios, TVs, computers, cell phone chargers, lights, generator motors, heaters, fans … ), and the transmitting antenna, which is fed with AC from electronic equipment and generates radiant energy.

 

The simplest antenna is a length of wire, connected at one end to a transmitter or receiver. More often, the radiating/receiving element is placed at a distance from the transmitter or receiver, and AC is delivered to or from the antenna by means of a transmission line, also called a feed line or feeder.  There is so much free energy in the air above that the use of longer wire antenna in excess of 500 feet or strung higher than head height can produce lethal amounts of electrical current.

 

Ask any electrician and he will no doubt tell you that Earth is always referred to as ground when explaining electrical circuitry.   He or she will also tell you that DC electrical current flows to ground or earth.  A lightning rod, invented by Benjamin Franklin, proves this.   If lightning hits a building it will preferentially strike the rod and be conducted to ground through the wire, instead of passing through the building, where it could start a fire or cause electrocution.   The Earth – the ground we stand on, walk on, sleep on , play. run on, drive on and build on is negative electrically charged and acts as a spherical capacitor.   According to Canada’s Department of Natural Resources – http://cfs.nrcan.gc.ca/pages/160 –  The Earth has a net negative charge of between 400,000 and 5000,00 coulombs, while an equal and positive charge resides in the atmosphere.

 

200 volts + head height

 

“There is about a 300 000 volt (V) potential difference between the Earth’s surface and the electrosphere, which gives an average electric field strength of about 6 V/metre (m) throughout the atmosphere. Near the surface, the fine-weather electric field strength is about 100 V/m..” Average height of a man is 6 feet or 2 meters so 100 V/m x 2 meters = 200 Volts 6 feet off the ground.

 

Wikipedia also states that Earth’s atmosphere is electrically charged. They disclose this with this statement – “The measurements of atmospheric electricity can be seen as measurements of difference of potential between a point of the Earth’s surface, and a point somewhere in the air above it. The atmosphere in different regions is often found to be at different local potentials, which differ from that of the earth sometimes even by as much as 3000 Volts within 100 feet (30 m). The electrostatic field and the difference of potential of the earth field according to investigations, is in summer about 60 to 100 volts and in winter 300 to 500 volts per meter of difference in height, a simple calculation gives the result that when such a collector is arranged for example on the ground, and a second one is mounted vertically over it at a distance of 2000 meters and both are connected by a conducting cable, there is a difference in potential in summer of about 2,000,000 volts and in winter even of 6,000,000 volts and more.http://en.wikipedia.org/wiki/Atmospheric_electricity

 

What both Wikipedia and the Canadian government are stating is exactly what Nikola Tesla and Dr. Thomas Henry Moray stated 80 years ago and tried to educate the World – that we are surrounded by a sea of energy. We need only know how to tap into it to power everything we use. Tesla knew how and powered an electric motor in an automobile.  Moray successfully tapped into this free energy and powered thirty-five 100-watt lamps and a 1200-watt iron simultaneously.

 

Solar panel manufacturers need only to replicate what Tesla and Moray did and their panels will be far more efficient (harness a lot more free sun energy) than they are now.  A simple redesign of the solar panel can tap into 200 volts positive of free, unlimited, unmetered and carbon-free electrical energy.  The biggest flaw in all solar panels is the reflective glass.  Solar panels reflect most of that free EM energy.  There is more deflecting glass and dielectric insulating material than energy conducting material in today’s solar cells. Very thin strips of conducting material can of course only harness very little energy. Replace the thin strips with thin sheets and you increase the inductance of the solar cells. A thin sheet of conducting material has a much greater inductance than very thin strips.

 

The law of reflection says that for specular reflection the angle at which the wave is incident on the surface equals the angle at which it is reflected. Solar panels are mirrors – reflecting the sun energy. A mirror provides the most common model for specular light (mirror-like) reflection, and typically consists of a glass sheet with a metallic coating where the reflection actually occurs. Reflection is enhanced by the metal of the solar cells by suppression of wave propagation beyond their skin depths. Reflection also occurs at the surface of transparent media, such as the glass top of all solar panels. Because all solar panels are stationary in relation to the moving sun energy is predominately being reflected and the remainder is refracted. Energy is only being absorbed in one incident only – when the sun is “exactly” perpendicular to the solar panel’ reflective surface. At all other times sun energy is either being reflected or refracted.

 

 

The solution is to make a electromagnetic (EM) energy receiving antenna that doesn’t reflect at all. An antenna m2 (meter square) with a non-reflective matt black surface. Black absorbs the light (EM radiation) and when it does this it is also absorbing energy – throughout the day. It doesn’t matter where the sunlight is coming from matt black will not reflect the free electromagnetic energy. Black absorbs all the visible electromagnetic radiation that falls on it.

 

Short URL: http://frenergy.ca/news/?p=789

Posted by on Apr 28 2013. Filed under Electrical, News, Solar. You can follow any responses to this entry through the RSS 2.0. You can skip to the end and leave a response. Pinging is currently not allowed.

1 Comment for “Tapping into 200 volts positive of free, unlimited and unmetered pure electrical energy.”


  1. The Egyptian Pyramids were actually built as electrical power generating and wireless transmitting power plants – not tombs. They were built to receive, store and transmit electromagnetic energy. The pyramid itself is a very large capacitor – stores electrical energy. They were made of granite (the dielectric or insulator) and sandstone (the quartz crystal electrical conductor) with a capstone (the antenna) made of granite, basalt, or any other very hard stone which was plated with Electrum – alloy of gold and silver, with trace amounts of copper and other electricity conducting metals. As stated many times before, electrical current flows to ground or earth – from the positively (+) charged air to the negatively (-) charged ground. The pyramids were built to harness and store this free and unlimited supply of electrical energy. Pyramids were built as electrical power plants – to tap into this free and unlimited supply of electrical energy.

    For centuries we thought they didn’t have the technical knowhow (technology) to build and erect very tall metal framed antenna towers so they built their free energy harnessing antennas using the technology and materials available during their life time – electrum plated capstone (antenna receiver/transmitter), sandstone (quartz crystal conductor) and granite (insulator).

    For centuries we thought the Egyptian ancestors were not as advanced as we are now. Evidence, however reveals just the opposite – that they were far superior than we are now. They had the technology to move and set 300 ton stones so perfectly close that not even a sheet of paper can fit between the blocks. We, today, do not have that technical knowhow. They had the technology to harness the infinite zero emission energy from the atmosphere and from the flux (flow) of water. Today we rely on the finite supply of inefficient and polluting oil, Alberta tar, natural gas, fake shale gas, coal, and uranium to generate “metered” electrical power.

    Over 4000 years ago man had the technology to build massive electric power plants – the pyramids. The sandstone (arenite) blocks used to build the pyramids were composed of crystal quartz and/or feldspar which are extremely high electrical conductors and the small amount of metal on the capstone allowed for maximum power generation and transmission. Also, the Giza Plateau where the pyramids stand was specifically chosen as the construction sites because the site is full of underground water channels. The pyramids were built above limestone layers that have spaces between them that are full of flowing (flux) water. These special layers of rock called aquifers transmit electricity upward as they carry underground water to the surface. The high volume flow (flux) of the River Nile that passes through these aquifers produces an electric current. This is known as physio-electricity. The pyramids were built to harness, store (capacitor), and transmit this electricity wirelessly. In 1901 Nikola Tesla began constructing the Wardenclyffe Tower (Tesla Tower). He understood ancient technology and set out to reeducate the World by demonstrating what the Egyptians knew and successfully built over 4000 years ago. If the Egyptians were to apply an insulating casing around the pyramids and reinstalled a capstone antenna (plated with an electricity conducting and transmitting metal like silver) their pyramids would once again harness, store and transmit wirelessly this free and unlimited electromagnetic energy. Even though they are thousands of years old they are still able to function today as electrical power generating power plants. Their main structure is fully intact.

    To answer the $ million question – What happened to the capstone and the massive shell casing of the Great Pyramid of Giza? Because the pyramids were massive capacitors, hooking a polarized capacitor backwards would result in the capacitor exploding – forcing the capstone off its peak like a volcano does with its dome when it erupts. The capstone is still in the Giza Plateau but heavily damaged and covered with sand. Detaching,removing or breaching a capacitor’s casing can also cause a capacitor to literally explode, ejecting its contents violently and shattering the casing off the sides of the pyramid. A catastrophic capacitor failure can result in pressure buildup and explosion if construction technique does not allow for a discharge of pressure. They built the capacitor but not the infrastructure to use (discharge) the generated electrical power and as a result the pyramid failed catastrophically. Warning – the flash capacitor of a camera or from any electronic circuit stores a lethal amount of electrical charge. Now image how lethal and destructive a capacitor the size of a pyramid would be when it fails..

You must be logged in to post a comment Login

Other News

H2O Fuel

H2O Fuels

Cold fission - the definition of fission is – splitting or breaking up into “parts”. Electrolysis of water is cold fission. It splits water (H2O) into Hydrogen gas (H2) and Oxygen (O). Hydrogen is a clean burning fuel. There are no environmental bi-products or side effects (zero carbon emissions, zero toxicity, zero tailings, zero watershed contamination, zero earthquake inducing fracking) associated with burning a hydrogen (H2) gas fuel. When we split the hydrogen (H2) from the water (H2O) we are left with Oxygen. Something we and every other living creature on Earth needs to live.

energy tip


Save money and instantly reduce your electrical consumption by 4500 watts.  Read how ...

Free unlimited EM Energy


Six feet above the ground (above head height) the air is charged with more than 200 volts positive of free energy.  This free energy is available day and night, 365 days a year and for millenniums.   That 200 volts + charged air is a source of free, unlimited, unmetered and carbon-free electrical energy.   The free energy is electromagnetic (EM) energy.  It can and has already been tapped into by World renowned scientists such as Nikola Tesla and Henry Moray.   Both tapped into this infinite supply of pure, zero emission electrical energy using a simple antenna. The Egyptian Pyramids were actually built as electrical power generating plants – not tombs. They were built to receive, store and transmit the free electromagnetic energy. The pyramid itself is a very large capacitor – stores electrical energy. They were made of granite (the dielectric or insulator) and sandstone (the quartz crystal electrical conductor) with a capstone (the antenna) made of granite, basalt, or any other very hard stone which was plated with Electrum – alloy of gold and silver, with trace amounts of copper and other electricity conducting metals.

Hydrogen Fuel from Water



FuelReducer H2O Fuel Cell video demonstrates just how easy it is to fuel the World with hydrogen fuel from water instead of oil or gas. Hydrogen (H2) fuel cells are being developed to convert any gasoline fueled vehicle into a hydrogen fueled vehicle that has zero emissions.  Instead of gasoline your vehicle can be fueled with hydrogen that is split from water using a radio wave frequency.  You can use water collected from a stream, pond, lake, river, ocean, ditch, swimming pool, household faucet or rainfall to fuel your vehicle, heat your home, cook your food, and fuel your electrical power generators.     In the video above just 4.5 volts was used to split water into a hydrogen and oxygen gas. Some of the frequencies (F) in hz and Duty Cycle (D) used - F640 D60, F800, D80, F1200. 6 volts would produce considerably more hydrogen gas fuel and 12 volts (just 10% or 1/10 the electrical power needed to power every toxic fluorescent light which requires 120 volts to operate) would produce more than enough hydrogen fuel to power a gas combustion engine like a portable electrical power generator. Another video of a working hydrogen fuel cell

FEATURED VIDEOS

Electric Cars Built 1st

Thomas Edison in his 1914 electric car. The electric car has been around longer than the gasoline car. They were being manufactured and sold before the advent of the gasoline powered cars .

Gas to Electric



Video shows you just how easy it is to convert a gasoline powered car into an all electric powered car. If a home mechanic can easily do it the automakers most certainly can too.

Free renewable biofuel



Uganda Africa construction video on how to make your own backyard biogas plant.  Daily gas production capacity of the above constructed digester is 2.6 cubic meters (time stamp 3:23).  That is equivalent to 2600 liters or 16.4  barrels of oil or 687 US liquid gallons.  For comparison an empty 20 lb barbecue propane tank will hold about 4.7 gallons of propane. Biogas can be used to heat your home, cook your food and power gas electric generators.  In the US and Canada you can use your existing prefab concrete or plastic septic tanks and produce your own biogas to fuel your home.  Bury a sealed plastic barrel or tank next to the septic tank and run a plastic tube from the top of your septic tank to the buried sealed plastic barrel or tank.  Then add a propane gas valve and fitting, like the ones from a barbecue, to the top of the sealed buried barrel or tank and you have your very own natural gas supply.

Free natural gas supply


Generate and collect free biogas fuel to fuel your home heating gas furnace, gas fireplace, gas generator, or other gas fueled appliances using your existing septic tank.  The free biogas fuel is generated 24/7 and 365 days a year.  A biogas collector sits on top of your existing septic tank.  Use any large "airtight" plastic or metal container (even a plastic fuel tank) as your biogas collector.  Join the septic tank to the collector using mass produced flexible plumbing tubing.  Run a pipe from the top of the collector to just above ground height. Attach a gas regulator value (like the ones used for barbecues) to the top of pipe to control the gas flow. Fill in with dirt and let mother nature generate a lifetime supply of free ecofriendly biofuel. 

Free Unmetered energy


Above displayed design and concept by © Paul W Kincaid - Generate unmetered AC and DC power simultaneously by coupling the shaft of a farm duty electric motor to the rotor shaft of a generator motor. Add a serpentine pulley to the joined shafts and connect with a belt to an attached alternator and recharge a 12 volt car battery. Running the electric motor power generating system off of a DC 12 volt car battery will recharge the battery as it generates free unmetered AC electrical power. If you use an AC electric motor that runs off AC current (from a wall outlet) connect a mass produced, store bought, power inverter to the alternator's battery output terminal and convert that output voltage (typically 13.8-14.2 volts) into free unmetered 120 volts. Add a switch to cut off the metered power and thereon power the AC motor using only the inverter power. Self Sustaining perpetual Electricity Generating

Need more power than what 1 generator can provide? Simply add another generator to the system using the serpentine belt. Gasoline combustion engines makes use of a serpentine belt to power your auto's accessories as the crankshaft turns. The same belt turns your alternator, power steering pump, air conditioning, water pump and so on. So you can use more than one electric power generator on your electric motor power generating system.


Click on the image above to download a .pdf instruction file on how to make your own FuelReducer mpg+ (developed and marketed by frenergy.ca's editor Paul W Kincaid) using mass produced, store bought, parts. You can use the instruction pdf file to build your own FuelReducer mpg+ and add an average of 5 mpg (potentially adding 100 miles per 20 gallon gas tank) to your vehicle's fuel efficiency plus (+) lower carbon emissions.  This simple device added 6 mpg to the fuel efficiency of a 1970 RS/Z28 Camaro powered by a 350 492 HP engine and the vehicle's owner reported that it ran the quarter mile in 11.92 seconds with a DIY FuelReducer mpg+ installed.

FAIR USE NOTICE:

The above videos may contain copyrighted material. Such material is made available for educational purposes only. This constitutes a 'fair use' of any such copyrighted material as provided for in Title 17 U.S.C. section 106A-117 of the U.S. Copyright Law.

© 2017 frenergy.ca – Free Renewable Energy. All Rights Reserved. Log in - Designed by Gabfire Themes