Home » News » Magnetic solution to increasing fuel efficiency

Magnetic solution to increasing fuel efficiency

electric taped fuel line magnets

Magnets can be used to increase your vehicle’s fuel efficiency. A magnetic field can be used to break down gasoline and diesel molecules into high mileage gas vapor.  Oil refineries use heat and pressure to “crack” heavy hydrocarbon molecules into lighter ones. This process is called Catalytic Cracking: breaking down the large molecules of heavy crude oil into smaller gasoline molecules.  Heating the fuel causes the liquid to expand and convert into a gas vapor.  Heating the liquid fuel anywhere before it reaches the engine will cause the liquid fuel to gasify resulting in an increase in fuel efficiency.

One way of heating the liquid fuel is by passing the fuel through an induction coil.  The induction coil uses direct electrical (DC) current (car battery) to cause an otherwise non-spontaneous chemical reaction and separation of the liquid fuel molecules into gas vapor molecules.   In other words, “crack” heavy hydrocarbon molecules into lighter ones.  An induction coil creates a magnetic field which permeates into a vehicle’s fuel lines and causes an otherwise non-spontaneous chemical reaction and separation of the liquid fuel molecules into gas vapor molecules.  Permanent magnets can do the same thing – create a magnetic field which permeates into a vehicle’s fuel lines and cause an otherwise non-spontaneous chemical reaction and separation of the liquid fuel molecules into gas vapor molecules  – but without requiring any external electrical energy source (car battery).

The presence of the magnetic field in the fuel line induces Eddy currents in accordance with Faraday’s Law of Electromagnetic Induction.  When a liquid (gasoline or diesel) is passed through a magnetic field the magnetic field changes the molecular structure of the liquid.

The Department of Physics, Temple University, Philadelphia, PA under the sponsorship of RAND Corporation found that a strong magnetic field can reduce the viscosity (thickness) of gasoline. diesel, and kerosene, no matter if they contain any additive or not.   Temple University determined that a magnetic field can thin fuel so that much smaller droplets are injected into the vehicle’s engine.  As a result higher fuel mileage is possible.  Add a strong magnetic field to your vehicle’s fuel delivery system and your vehicle’s fuel mileage will increase.

Most vehicles today are manufactured using plastic composite fuel lines. They got rid of the metal ones to prevent you from heating the fuel before it is injected into the gas combustion engine of your vehicle. As stated above: “Heating the liquid fuel anywhere before it reaches the engine will cause the liquid fuel to gasify resulting in an increase in fuel efficiency.

You can increase your vehicle’s fuel efficiency even without metal fuel lines. Again, as stated above: “a strong magnetic field can thin fuel so that much smaller droplets are injected into the vehicle’s engine. As a result higher fuel mileage is possible.

You can perform a simple test and see for yourself how magnets can increase fuel efficiency by taping small round magnets to the plastic fuel line of your vehicle as shown in the image I designed above (click on the image to enlarge). No mechanic is required. Just some small powerful magnets and a roll of electrical tape. The electrical tape will secure the magnets to the plastic fuel line as well as waterproof and insulate the magnets. Attach the magnets to the intake fuel line, not the return fuel line (yes there are usually 2 fuel lines. The return line does what its name says – it returns fuel to the gas tank).

Gasoline in the liquid form does not even burn, much less, explode. Only the vapor that comes from the gasoline will burn. Therefore, to mix raw gasoline with air, and attempt to explode it in an internal combustion engine is a very wasteful, costly, and polluting practice. It also shortens the life of the engine and exhaust system.” ~ Popular Science, December 1957

Magnets helps convert liquid fuel into a more volatile gaseous state.

Short URL: http://frenergy.ca/news/?p=898

Posted by on Nov 30 2013. Filed under News. You can follow any responses to this entry through the RSS 2.0. You can skip to the end and leave a response. Pinging is currently not allowed.

1 Comment for “Magnetic solution to increasing fuel efficiency”

  1. Fuel EMCS

    Oil refineries use heat and pressure to “crack” heavy hydrocarbon (crude oil) molecules into smaller ones and produce diesel, gasoline, kerosene, jet fuel and other carbon fuels. Catalytic Cracking can also be done, and has been done, using strong electromagnetic fields.

    A fuel electromagnetic cracking solenoid (EMCS) can crack gasoline and diesel fuel and produce high mileage and long lasting gas vapor fuel. Electromagnetic cracking can be used in vehicles as well as at home for home heating and electrical power generation. You don’t need a lot of energy to crack gasoline and diesel. The power source for the Fuel EMCS is already installed in your vehicle(s). Your vehicle’s battery, which is recharged while you drive by the alternator, provides all the energy you need to crack gasoline and diesel and produce a high mileage gas vapor fuel. Even if they water down or dope the gasoline and diesel with fuel additives, a Fuel EMCS can crack the water (H2O) in the fuel and convert the water into a hydrogen gas fuel as you drive.

You must be logged in to post a comment Login

Other News

H2O Fuel

H2O Fuels

Cold fission - the definition of fission is – splitting or breaking up into “parts”. Electrolysis of water is cold fission. It splits water (H2O) into Hydrogen gas (H2) and Oxygen (O). Hydrogen is a clean burning fuel. There are no environmental bi-products or side effects (zero carbon emissions, zero toxicity, zero tailings, zero watershed contamination, zero earthquake inducing fracking) associated with burning a hydrogen (H2) gas fuel. When we split the hydrogen (H2) from the water (H2O) we are left with Oxygen. Something we and every other living creature on Earth needs to live.

energy tip


Save money and instantly reduce your electrical consumption by 4500 watts.  Read how ...

Free unlimited EM Energy


Six feet above the ground (above head height) the air is charged with more than 200 volts positive of free energy.  This free energy is available day and night, 365 days a year and for millenniums.   That 200 volts + charged air is a source of free, unlimited, unmetered and carbon-free electrical energy.   The free energy is electromagnetic (EM) energy.  It can and has already been tapped into by World renowned scientists such as Nikola Tesla and Henry Moray.   Both tapped into this infinite supply of pure, zero emission electrical energy using a simple antenna. The Egyptian Pyramids were actually built as electrical power generating plants – not tombs. They were built to receive, store and transmit the free electromagnetic energy. The pyramid itself is a very large capacitor – stores electrical energy. They were made of granite (the dielectric or insulator) and sandstone (the quartz crystal electrical conductor) with a capstone (the antenna) made of granite, basalt, or any other very hard stone which was plated with Electrum – alloy of gold and silver, with trace amounts of copper and other electricity conducting metals.

Hydrogen Fuel from Water



FuelReducer H2O Fuel Cell video demonstrates just how easy it is to fuel the World with hydrogen fuel from water instead of oil or gas. Hydrogen (H2) fuel cells are being developed to convert any gasoline fueled vehicle into a hydrogen fueled vehicle that has zero emissions.  Instead of gasoline your vehicle can be fueled with hydrogen that is split from water using a radio wave frequency.  You can use water collected from a stream, pond, lake, river, ocean, ditch, swimming pool, household faucet or rainfall to fuel your vehicle, heat your home, cook your food, and fuel your electrical power generators.     In the video above just 4.5 volts was used to split water into a hydrogen and oxygen gas. Some of the frequencies (F) in hz and Duty Cycle (D) used - F640 D60, F800, D80, F1200. 6 volts would produce considerably more hydrogen gas fuel and 12 volts (just 10% or 1/10 the electrical power needed to power every toxic fluorescent light which requires 120 volts to operate) would produce more than enough hydrogen fuel to power a gas combustion engine like a portable electrical power generator. Another video of a working hydrogen fuel cell

FEATURED VIDEOS

Electric Cars Built 1st

Thomas Edison in his 1914 electric car. The electric car has been around longer than the gasoline car. They were being manufactured and sold before the advent of the gasoline powered cars .

Gas to Electric



Video shows you just how easy it is to convert a gasoline powered car into an all electric powered car. If a home mechanic can easily do it the automakers most certainly can too.

Free renewable biofuel



Uganda Africa construction video on how to make your own backyard biogas plant.  Daily gas production capacity of the above constructed digester is 2.6 cubic meters (time stamp 3:23).  That is equivalent to 2600 liters or 16.4  barrels of oil or 687 US liquid gallons.  For comparison an empty 20 lb barbecue propane tank will hold about 4.7 gallons of propane. Biogas can be used to heat your home, cook your food and power gas electric generators.  In the US and Canada you can use your existing prefab concrete or plastic septic tanks and produce your own biogas to fuel your home.  Bury a sealed plastic barrel or tank next to the septic tank and run a plastic tube from the top of your septic tank to the buried sealed plastic barrel or tank.  Then add a propane gas valve and fitting, like the ones from a barbecue, to the top of the sealed buried barrel or tank and you have your very own natural gas supply.

Free natural gas supply


Generate and collect free biogas fuel to fuel your home heating gas furnace, gas fireplace, gas generator, or other gas fueled appliances using your existing septic tank.  The free biogas fuel is generated 24/7 and 365 days a year.  A biogas collector sits on top of your existing septic tank.  Use any large "airtight" plastic or metal container (even a plastic fuel tank) as your biogas collector.  Join the septic tank to the collector using mass produced flexible plumbing tubing.  Run a pipe from the top of the collector to just above ground height. Attach a gas regulator value (like the ones used for barbecues) to the top of pipe to control the gas flow. Fill in with dirt and let mother nature generate a lifetime supply of free ecofriendly biofuel. 

Free Unmetered energy


Above displayed design and concept by © Paul W Kincaid - Generate unmetered AC and DC power simultaneously by coupling the shaft of a farm duty electric motor to the rotor shaft of a generator motor. Add a serpentine pulley to the joined shafts and connect with a belt to an attached alternator and recharge a 12 volt car battery. Running the electric motor power generating system off of a DC 12 volt car battery will recharge the battery as it generates free unmetered AC electrical power. If you use an AC electric motor that runs off AC current (from a wall outlet) connect a mass produced, store bought, power inverter to the alternator's battery output terminal and convert that output voltage (typically 13.8-14.2 volts) into free unmetered 120 volts. Add a switch to cut off the metered power and thereon power the AC motor using only the inverter power. Self Sustaining perpetual Electricity Generating

Need more power than what 1 generator can provide? Simply add another generator to the system using the serpentine belt. Gasoline combustion engines makes use of a serpentine belt to power your auto's accessories as the crankshaft turns. The same belt turns your alternator, power steering pump, air conditioning, water pump and so on. So you can use more than one electric power generator on your electric motor power generating system.


Click on the image above to download a .pdf instruction file on how to make your own FuelReducer mpg+ (developed and marketed by frenergy.ca's editor Paul W Kincaid) using mass produced, store bought, parts. You can use the instruction pdf file to build your own FuelReducer mpg+ and add an average of 5 mpg (potentially adding 100 miles per 20 gallon gas tank) to your vehicle's fuel efficiency plus (+) lower carbon emissions.  This simple device added 6 mpg to the fuel efficiency of a 1970 RS/Z28 Camaro powered by a 350 492 HP engine and the vehicle's owner reported that it ran the quarter mile in 11.92 seconds with a DIY FuelReducer mpg+ installed.

FAIR USE NOTICE:

The above videos may contain copyrighted material. Such material is made available for educational purposes only. This constitutes a 'fair use' of any such copyrighted material as provided for in Title 17 U.S.C. section 106A-117 of the U.S. Copyright Law.

© 2017 frenergy.ca – Free Renewable Energy. All Rights Reserved. Log in - Designed by Gabfire Themes