Home » News » Convert liquid fuel into high mileage fuel vapor using fuel aeration

Convert liquid fuel into high mileage fuel vapor using fuel aeration

trunk fuel tank vaporation system

Can you exponentially increase your vehicle’s fuel mileage by using only the gas vapor from the top inside of your vehicle’s liquid fuel tank? According to the US government gas vapor and not liquid fuel is what runs all internal combustion engines. FEMA ”All internal combustion engines actually run on vapor, not liquid. The liquid fuels used by gasoline engines are vaporized before they enter the combustion chamber above the pistons.” This claim was made in a FEMA (Federal Emergency Management Agency) report that was published in 1989 www.woodgas.net/files/FEMA_emergency_gassifer.pdf

According to FEMA, you actually can exponentially increase your vehicle’s fuel mileage by using only the gas vapor.  All vehicles on the road today would run more efficiently if only fuel vapor was used. If all vehicles were fueled only by fuel vapor carbon emissions would drastically diminish. Keeping that in mind, you can convert every car or truck into a high mileage fuel vapor vehicle using your vehicle’s existing fuel tank and fuel sending unit. There is no need to manufacture any new parts as this fuel vapor system uses existing mass produced, store bought parts. You will need 3 main parts:

1) an air compressor or truck air brake tank – will function as a fuel vapor collector tank. The collector tank collects and stores the generated fuel vapor.

2) a stainless steel barbecue burner – functions as an aerator. Affixed to the bottom of the liquid fuel tank so that filtered air can be pumped into the liquid fuel. Pumping filtered air into the liquid fuel causes the air to become saturated with the fuel as it rises out of the liquid fuel and into a fuel line attached fuel vapor collector tank.

3) a large air filter – filters the air before it enters the liquid fuel tank. Filtering the air before it is pumped into the aerator prevents dirt from clogging the aerator. Mass produced truck air filter or custom car air filter can be used.

To connect the above components you will also need a number of fuel lines, fuel line fittings for the air filter and fuel vapor collector tank and a pressure gauge. The fittings you buy must be for fuel lines. Custom car / automotive parts stores will carry the right fittings, fuel lines and air filters for the conversion. Heavy truck parts stores will more than likely have the air brake tank you will need.

As FEMA has stated all cars and trucks “actually run on vapor not liquid” fuel. The auto makers know this, yet still do not assemble any cars or trucks with a fuel vapor fuel system. Auto makers make no attempts to vaporize the liquid gasoline. They replaced carburetors with fuel injectors but your vehicle’s fuel injectors do not inject fuel vapor into the combustion chamber of your vehicle’s engine. Fuel injectors inject fuel droplets, which is still a liquid fuel.

Fuel injectors didn’t increase fuel mileage, they regulate and control the precise amount of fuel that is consumed by your vehicle’s engine via fuel injectors that are precisely controlled by your vehicle’s electronic control module (ECM). The ECM was introduced to prevent your vehicle from achieving higher fuel efficiency by automatically regulating the air fuel mixture so that it only runs using the oil and gas companies’ high fuel consumption standard of 14.6:1 air:fuel mixture.

Simply by increasing the air fuel mixtures to 17:1 or higher will automatically achieve much higher fuel mileage, however, the ECM makes sure it doesn’t. The ECM makes sure oil and gas companies make a profit with high liquid fuel demand and consumption.

By converting liquid fuel into a fuel vapor at the source – the gas tank – much higher fuel mileage is achievable. Higher fuel mileage means lower fuel demand and a substantial fuel cost saving. Instead of pumping liquid fuel from the fuel tank and through the fuel line, fuel vapor is generated and pumped through your vehicle’s fuel system.

The same principle is already and has been used for decades in propane fueled vehicles worldwide. In propane fueled vehicles (taxis) the liquid propane stored in a propane tank is converted into a gases state in the engine compartment. Liquid fuel aeration converts liquid gasoline into a highly combustible gas vapor, inside the liquid fuel tank.

Fuel tank aeration (draw in filtered air into the liquid fuel) effectively converts the liquid fuel in the fuel tank into a fuel vapor without adding heat or making any expensive modification.

Fuel vapor not only increases fuel efficiency it also reduces carbon emissions and your fuel cost. You can drive a lot farther when you fuel your vehicle with fuel vapor. How much farther? The saturated vapor volume of an average gallon of liquid gasoline when fully evaporated is 160 gallons of vapor at 60° F and sea level. That means, if you were able to completely vaporize 1 gallon of liquid gasoline you would have 160 gallons of fuel vapor. If you were to incorporate this fuel vapor technology your car or truck could potentially travel as much as 160 times farther on one gallon of liquid fuel. On average the fuel efficiency of most cars on the road today is approximately 20 mpg. 20 mpg x liquid to vapor conversion factor of 160 = 3200 mpg. How many would be very happy with a liquid to vapor conversion factor of 5 or 10 (increase of 100 to 200 mpg)?

Fuel vapor burns much cleaner than liquid gasoline and has a higher octane rating. A lean running engine (ie, an engine using more air than fuel) has a cooler combustion process than the typical ECM engine with a preset (never deviating) chemically correct mixture of 14.6 air : 1 fuel. Running cooler is also better for the engines. Cooler running engines means a reduction in heat damage and failure.

Why haven’t you heard about this technology? The oil industry and government have been intentionally keeping you in the dark. The oil industry stands to lose $billions if everyone knew about this technology. Government would lose tax revenue too. So they cover up this proven technology.

It takes two to five barrels of fresh drinking water to produce 1 barrel of the very toxic Alberta tar (asphalt) they call oil. About two tons of tar sands is stripped mined to produce one barrel of liquefied Alberta tar. …. All these processes take huge amounts of energy and water, while emitting very high amounts of CO2.

It was because of oil that the US attacked Afghanistan – to build the Trans Afghan Pipeline. It was because of oil that the US attacked Iraq. It was because of oil the US attacked Libya. Oil reserves in Libya are the largest in Africa and the eighth largest in the world with 46.4 billion barrels as of 2010. It is because of oil that the US and Israel sent mercenaries into Syria to cause an uprising. In 2010, Syria produced around 385000 barrels per day of crude oil. Also, just before the US/Israel sponsored terrorist uprising in Syria, a very large and very lucrative oil and natural gas field was discovered off Syria’s coast. Very strong motive for Israel to send mercenaries into Syria to destroy Syria and overthrow its government.

Short URL: http://frenergy.ca/news/?p=908

Posted by on Jun 27 2014. Filed under News. You can follow any responses to this entry through the RSS 2.0. Both comments and pings are currently closed.

Comments are closed

Other News

H2O Fuel

H2O Fuels

Cold fission - the definition of fission is – splitting or breaking up into “parts”. Electrolysis of water is cold fission. It splits water (H2O) into Hydrogen gas (H2) and Oxygen (O). Hydrogen is a clean burning fuel. There are no environmental bi-products or side effects (zero carbon emissions, zero toxicity, zero tailings, zero watershed contamination, zero earthquake inducing fracking) associated with burning a hydrogen (H2) gas fuel. When we split the hydrogen (H2) from the water (H2O) we are left with Oxygen. Something we and every other living creature on Earth needs to live.

energy tip

Save money and instantly reduce your electrical consumption by 4500 watts.  Read how ...

Free unlimited EM Energy

Six feet above the ground (above head height) the air is charged with more than 200 volts positive of free energy.  This free energy is available day and night, 365 days a year and for millenniums.   That 200 volts + charged air is a source of free, unlimited, unmetered and carbon-free electrical energy.   The free energy is electromagnetic (EM) energy.  It can and has already been tapped into by World renowned scientists such as Nikola Tesla and Henry Moray.   Both tapped into this infinite supply of pure, zero emission electrical energy using a simple antenna. The Egyptian Pyramids were actually built as electrical power generating plants – not tombs. They were built to receive, store and transmit the free electromagnetic energy. The pyramid itself is a very large capacitor – stores electrical energy. They were made of granite (the dielectric or insulator) and sandstone (the quartz crystal electrical conductor) with a capstone (the antenna) made of granite, basalt, or any other very hard stone which was plated with Electrum – alloy of gold and silver, with trace amounts of copper and other electricity conducting metals.

Hydrogen Fuel from Water

FuelReducer H2O Fuel Cell video demonstrates just how easy it is to fuel the World with hydrogen fuel from water instead of oil or gas. Hydrogen (H2) fuel cells are being developed to convert any gasoline fueled vehicle into a hydrogen fueled vehicle that has zero emissions.  Instead of gasoline your vehicle can be fueled with hydrogen that is split from water using a radio wave frequency.  You can use water collected from a stream, pond, lake, river, ocean, ditch, swimming pool, household faucet or rainfall to fuel your vehicle, heat your home, cook your food, and fuel your electrical power generators.     In the video above just 4.5 volts was used to split water into a hydrogen and oxygen gas. Some of the frequencies (F) in hz and Duty Cycle (D) used - F640 D60, F800, D80, F1200. 6 volts would produce considerably more hydrogen gas fuel and 12 volts (just 10% or 1/10 the electrical power needed to power every toxic fluorescent light which requires 120 volts to operate) would produce more than enough hydrogen fuel to power a gas combustion engine like a portable electrical power generator. Another video of a working hydrogen fuel cell


Electric Cars Built 1st

Thomas Edison in his 1914 electric car. The electric car has been around longer than the gasoline car. They were being manufactured and sold before the advent of the gasoline powered cars .

Gas to Electric

Video shows you just how easy it is to convert a gasoline powered car into an all electric powered car. If a home mechanic can easily do it the automakers most certainly can too.

Free renewable biofuel

Uganda Africa construction video on how to make your own backyard biogas plant.  Daily gas production capacity of the above constructed digester is 2.6 cubic meters (time stamp 3:23).  That is equivalent to 2600 liters or 16.4  barrels of oil or 687 US liquid gallons.  For comparison an empty 20 lb barbecue propane tank will hold about 4.7 gallons of propane. Biogas can be used to heat your home, cook your food and power gas electric generators.  In the US and Canada you can use your existing prefab concrete or plastic septic tanks and produce your own biogas to fuel your home.  Bury a sealed plastic barrel or tank next to the septic tank and run a plastic tube from the top of your septic tank to the buried sealed plastic barrel or tank.  Then add a propane gas valve and fitting, like the ones from a barbecue, to the top of the sealed buried barrel or tank and you have your very own natural gas supply.

Free natural gas supply

Generate and collect free biogas fuel to fuel your home heating gas furnace, gas fireplace, gas generator, or other gas fueled appliances using your existing septic tank.  The free biogas fuel is generated 24/7 and 365 days a year.  A biogas collector sits on top of your existing septic tank.  Use any large "airtight" plastic or metal container (even a plastic fuel tank) as your biogas collector.  Join the septic tank to the collector using mass produced flexible plumbing tubing.  Run a pipe from the top of the collector to just above ground height. Attach a gas regulator value (like the ones used for barbecues) to the top of pipe to control the gas flow. Fill in with dirt and let mother nature generate a lifetime supply of free ecofriendly biofuel. 

Free Unmetered energy

Above displayed design and concept by © Paul W Kincaid - Generate unmetered AC and DC power simultaneously by coupling the shaft of a farm duty electric motor to the rotor shaft of a generator motor. Add a serpentine pulley to the joined shafts and connect with a belt to an attached alternator and recharge a 12 volt car battery. Running the electric motor power generating system off of a DC 12 volt car battery will recharge the battery as it generates free unmetered AC electrical power. If you use an AC electric motor that runs off AC current (from a wall outlet) connect a mass produced, store bought, power inverter to the alternator's battery output terminal and convert that output voltage (typically 13.8-14.2 volts) into free unmetered 120 volts. Add a switch to cut off the metered power and thereon power the AC motor using only the inverter power. Self Sustaining perpetual Electricity Generating

Need more power than what 1 generator can provide? Simply add another generator to the system using the serpentine belt. Gasoline combustion engines makes use of a serpentine belt to power your auto's accessories as the crankshaft turns. The same belt turns your alternator, power steering pump, air conditioning, water pump and so on. So you can use more than one electric power generator on your electric motor power generating system.

Click on the image above to download a .pdf instruction file on how to make your own FuelReducer mpg+ (developed and marketed by frenergy.ca's editor Paul W Kincaid) using mass produced, store bought, parts. You can use the instruction pdf file to build your own FuelReducer mpg+ and add an average of 5 mpg (potentially adding 100 miles per 20 gallon gas tank) to your vehicle's fuel efficiency plus (+) lower carbon emissions.  This simple device added 6 mpg to the fuel efficiency of a 1970 RS/Z28 Camaro powered by a 350 492 HP engine and the vehicle's owner reported that it ran the quarter mile in 11.92 seconds with a DIY FuelReducer mpg+ installed.


The above videos may contain copyrighted material. Such material is made available for educational purposes only. This constitutes a 'fair use' of any such copyrighted material as provided for in Title 17 U.S.C. section 106A-117 of the U.S. Copyright Law.

© 2017 frenergy.ca – Free Renewable Energy. All Rights Reserved. Log in - Designed by Gabfire Themes