Carbon free electrical power generator. No tank, no fuel, no exhaust = Zero emissions.

Generate electricity when you need it without using a drop of oil, gasoline, propane, natural gas or water.  Use at home, at the cottage, on camping, fishing or hunting trips, at your construction site, in your warehouse or anywhere you need electrical power.  No more wasting your hard earned money on expensive, toxic and polluting fossil fuel, tar sand (asphaltum) or fabricated shale gas (Hydrogen sulfide a.k.a. H2S).  No more worrying about CO2 emissions, smog or global warming.  The frenergy generator produces zero emissions.  Because there is absolutely zero emissions the generator can be used indoors.   Uses no oil, gasoline, propane, natural gas or hydrogen fuel.  Uses no water.  Not a drop of oil is needed or used for cooling or lubrication.  There is no fuel tank or combustion motor to constantly fuel.  The is no noisy and carbon monoxide poisoning muffler.  The generator uses very low voltage electricity to generate high voltage electricity.  You don’t plug it in and use metered electrical power either.  It powers itself.  Just turn on the switch and generate you own electricity, when you need it and where you need it.  The ultimate green energy generating machine.

No new technology involved in making the frenergy electrical power generator.  Designed to use existing mass produced electrical components.  Can be manufactured and sold as a completely new generator simply by assembling a very small number of existing new mass produced components or can be built at home by modifying an existing mass produced gas powered generator.

Could also be used as the power supply for an electric motor in an electric car.  Could be used to replace an electric car’s very expensive and heavy battery packs.

alternator water flow generator by Paul W Kincaid

There is a way to generate free self-sustaining electrical energy for your cottage or home using water.  The system generates free energy without contaminating the water, consuming it or wasting it.  You don’t even have to collect or store water.  It produces no carbon emissions.  It generates more electrical power than any solar panel or wind turbine and you can build it using parts salvaged from an automotive scrap yard.  The water flow generator uses free flowing water from streams or rivers to generate renewable and free self-sustaining electrical energy.

You can construct a water flow generator yourself in a weekend using salvaged automotive parts that you can acquire very cheaply from any one of the thousands of automotive scrap yards.   You can use a car’s rear axle assembly or utility trailer axle assembly as they both already have a hardened steel drive shaft and bearings installed to allow the axle to turn freely.

The axle assembly is coupled with another automotive part that has for decades, generated electrical current to power every car and truck’s electrical system and simultaneously recharge the vehicle’s battery – an alternator.  An alternator is an electromechanical device that converts mechanical energy to electrical energy in the form of alternating current.  The water flow supplies the mechanical energy by causing the fins of the water flow generator to be pushed downward in a counter-clockwise rotation.  As the fins are forced downward with the water flow is causes the attached axle to rotate which causes the coupled rotor of the alternator to rotate in sync and generate free renewable self-sustaining electrical energy.

Attach all of these salvaged parts to a concrete slab that you can make yourself or have a cement company fabricate one for you.  Cheaper if you make it yourself.  You can also make the base, to which the drive shaft and alternator are attached, out of wood timber.  Concrete is advised as it is heavier and is less likely to move with the water flow.  If you use wood timber you will have to anchor it in place by driving supporting posts into the ground and build the base to the posts – like you would do if you were building a fence or raised cottage.

Economical, natural and easy to construct wooden framed Water flow generator

The system is ideally laid in a free flowing stream or you can construct it a short distance and parallel to a free flowing stream and divert (channel) some of the stream’s water flow to it and over it.  That way you don’t disturb the natural downstream flow of the stream and you can build the system without having to dam the stream or get wet building it.  When you dam a stream you cut off the water supply for your neighbours and wildlife downstream.  That could get you in a lot of trouble with your neighbours and inadvertently alert the government crooks to the fact that you are building something without their extortion racketeering permission.

The heart of the water flow generator system is the mass produced automotive alternator.  If a car or truck’s alternator can generate electrical current to power all of your vehicle’s electrical systems and simultaneously recharge your vehicle’s battery it can also generate electrical current to power the lights and appliances, and electrical gadgets (laptop) in your cottage or home and simultaneously recharge all your batteries (cell phone, laptop, iPad) – for free.  An alternator is a compact and portable electrical power generator.  They were developed and installed in every gas combustion vehicle ever made to perform one purpose – generate electrical power for the vehicle.   Today, the alternator can be used to perform that exact same purpose – generate electrical power but for your cottage or home.  As long as the water flows freely and turns the blades of a water flow generator it will generate free self-sustaining electrical power.  Since you are dealing with water an alternator is the perfect electrical power generator for the job as they were intentionally built to operate in a wet environment – in your vehicle’s engine comportment which is exposed to the wet environment of snow and rain.

Dual water flow generator – gravity or level flow energy generation

Towns and cities around the World can use this technology to produce their own electrical energy on site.  Just make it bigger and instead of an alternator attach a generator from a stripped down (remove the diesel engine, fuel tank, and other diesel fuel engine parts) diesel generator to the system.  For added electrical power generation just add more of these water flow generators downstream.  Your neighbours downstream can also build their own and generate free energy for their needs as no water is being taken by the water flow generator upstream.   The water is allowed to flow naturally and  undiminished.   Cities and towns can construct many of these along the rivers and streams that pass through their municipalities.  As the rivers and streams flows differently through them they need only make a small modification to the design.  Build the system so that the generator is raised above the water in such a manner that the fins are slightly immersed in the water along the shore and let the water current interact and turn the drive shaft and generate renewable and free self-sustaining electrical power.

The system can be easily modified.  Don’t have a free flowing stream nearby- use your town or city’s drainage system and generate electrical power.  Cities can cut costs simply by generating their own electrical power throughout the city.  Cities have a constant – 24/7/365 days a year – flow of sewage and black water flowing just beneath their streets.  Cities can take advantage of this and generate supplemental electrical power just by installing a water flow generator in manholes throughout the city.

Drain pipe water flow generator

Cities can generate electrical power to power street cars, street lights or recharging outlets for the city’s fleet of all-electric vehicles using a drain pipe water flow generator.  The infrastructure is already there to turn any city into a carbon free, smog free environment.

Moving forward without a drop of oil or gas

We can reduce food prices, the cost of living, national health care cost, cure all fossil fuel caused cancer and disease, drastically reduce CO2 pollution and climate change simply by getting the World off oil and gas and running on electricity.  We have the technology today to power all of our vehicles and homes without using a drop of oil or gas and without using a drop of our finite supply of fresh water.  We’ve had the technology for over a 100 years now.  Henry Ford’s first car was electric.  Thomas Edison also produced electric cars.  Nikola Tesla successfully demonstrated how Ford and all automakers could power their cars using free unmetered electrical power but bankers like JP Morgan and Standard Oil founder John D. Rockefeller had different plans for the American people and for the World.

Today Ford is once again producing electric (hybrid) cars.  None of the Big 3 are making all-electric cars even though the technology exists for them to do so.  Why not?  They claim that the limited range of electric cars makes mass producing them financially infeasible.  Battery technology is still not able to extend driving range beyond 100 miles.  Recharging infrastructure doesn’t exist and is apparently too costly to even consider starting construction.  But I know this to be BS.  Tesla demonstrated in the 1930s the technology that drastically extended the driving range of electric cars – far beyond any gas combustion vehicle manufactured today.  Today, every vehicle manufactured by Ford, GM, Chrysler, Honda, Toyota, … can be easily converted into an all-electric zero-emission zero carbon fuel vehicle.  The Drive-Charge ™ electric motor (designed by PRESS Core editor Paul W Kincaid) can easily achieve this.

Impossible!  Not possible!  Can’t be done.  Tesla proved that it is possible using free unmetered energy that is all around us.   He erected an antenna and harnessed radio waves and other electromagnetic waves and converted those electromagnetic waves  into usable electrical energy and powered an electric motor in a gas to electric converted 1931 Pierce Arrow.   The Drive-Charge electric motor uses today’s mass produced technology to generate self-sustaining electrical energy.  This system functions exactly like the gasoline combustion engine in your car or truck and in all gas powered electrical power generators only it uses no gasoline to generate electrical power on-demand.

In all gas combustion engine gasoline is required to power them.  When a gas combustion engine is supplied with a finite and costly carbon based fuel and started it immediately starts turning a crank shaft that is connected to either a transmission (provides motion for your vehicle) or to an electrical power generator motor (generates electrical power for your home).  Without fuel the gas combustion engine cannot run and provide motion or generate electrical power.

In your vehicle’s engine compartment you will typically find: a gas combustion engine, an alternator, a battery, and serpentine belts that are connected to a number of other necessary engine components – water pump, air conditioner pump, power steering pump and cooling fan.  The gas combustion engine is powering all of these parts and it is doing this simultaneously.  As soon as you turn off the gas combustion engine all the connected parts and components are turned off too as they all rely on the “turning” of the engine’s crank shaft to power them.

In the drive-charge electric motor system the gas combustion engine is substituted with an electric motor – either an AC or DC motor.  Now you know an electric motor is powered by electricity – either AC or DC current.  For AC electric motors you need AC electrical current.  For a DC motor you need DC electrical current.  A car’s 12 volt battery stores DC electrical power and when fully charged provides enough electrical current to power a DC electric motor.  The stored DC energy in that same battery can also be converted into AC electrical power using a mass produced store bought power inverter and provide AC electrical power to an AC electric motor.

If a single gas combustion engine can power many electrical and mechanical parts simultaneously and constantly using a simple serpentine belt a single electric motor can do the same.  Instead of needing and using gasoline, diesel or natural gas to power your vehicle you now need and use a constant supply of electrical power.  No gas combustion engine can produce its own fuel, but an electric motor can produce its own electrical power if it is connected – by either serpentine belt, shaft or chain – to electrical power generators – i.e. mass produced alternator, mass produced ignition coil and/or mass produced electrical power generators.

Drive-Charge electrical power generator for home or cottage

The battery provides sufficient electrical power to cause the rotor in the electric motor to start turning.  Once the rotor in the electric motor starts turning it causes the rotors in the serpentine connected alternator and electrical power generator to start turning and starts converting mechanical energy (rotor turning) to electrical energy in the form of alternating current.  An alternator is defined as an electromechanical device that converts mechanical energy to electrical energy in the form of alternating current.  Alternators are used in “all” gas combustion automobiles to charge the battery and to power the electrical system when its engine is running. In an electric motor powered vehicle the electric motor is both the vehicle’s engine and a component (part) in the vehicle’s electrical system.  Hooking an alternator to an electric motor by way of of serpentine belt (the exact same way it is done in a combustion engine vehicle) the alternator continuously recharges the battery and powers the electrical system (including the connected “electric” motor engine).  As long as the electric motor (engine) is running both DC and AC electrical power is generated simultaneously and perpetually by the attached alternator and electrical power generator.

Self-sustaining electrical power generation for your home and auto. Recharges itself and generates its own electrical power.  Doesn’t need a drop of carbon fuel or natural gas. All-electric power regeneration. Zero emissions.  Carbon-free energy to power the World.

M2 Electromagnetic Microcell designed by Paul W Kincaid

Physicists, oil companies and your governments have a guarded secret that they do not want you to know about.  Their secret is that six feet above the ground (above head height) the air is charged with more than 200 volts positive in respect to the ground.  In comparison, your electrical outlets and home appliances are charged with 120 volts positive and you car battery is charged with just 12 volts positive.  That 200 volts + charged air is a source of free, unlimited, unmetered and carbon-free electrical energy.   The energy is electromagnetic (EM) energy.  It can and has already been tapped into by World renowned scientists such as Nikola Tesla and Henry Moray.   Both tapped into this infinite supply of pure, zero emission electrical energy using a simple antenna.

Over 80 years ago Nikola Tesla utilized a  6-foot vertical antenna rod and tapped in this free and infinite source of energy and powered a 80-horsepower alternating-current electric motor that he installed in a car.  Tesla was so successful in tapping into this free energy source that the electrical power harnessed was sufficient enough to power the electric motor and drive a converted (gasoline to electric) Pierce-Arrow at speeds of 90 m.p.h.

In 1932 (81 years ago) Dr Moray also successfully tapped into this free and infinite source of energy using a simple long wire antenna.  A long piece of insulated wire acts as an antenna. The very cheap long wire antenna captures electromagnetic energy.   An antenna is nothing more than a transducer that converts free electromagnetic (EM) energy into alternating current (AC electrical power) or vice-versa. There are two basic types: the receiving antenna, which intercepts free EM energy (RF) and delivers the AC current to electronic equipment (radios, TVs, computers, cell phone chargers, lights, generator motors, heaters, fans … ), and the transmitting antenna, which is fed with AC from electronic equipment and generates radiant energy.

The simplest antenna is a length of wire, connected at one end to a transmitter or receiver. More often, the radiating/receiving element is placed at a distance from the transmitter or receiver, and AC is delivered to or from the antenna by means of a transmission line, also called a feed line or feeder.  There is so much free energy in the air above that the use of longer wire antenna in excess of 500 feet or strung higher than head height can produce lethal amounts of electrical current.

Ask any electrician and he will no doubt tell you that Earth is always referred to as ground when explaining electrical circuitry.   He or she will also tell you that electrical current flows to ground or earth. The Earth – the ground we stand on, walk on, sleep on , play. run on, drive on and build on is negative electrically charged and acts as a spherical capacitor.   According to Canada’s Department of Natural Resources – http://cfs.nrcan.gc.ca/pages/160 –  The Earth has a net negative charge of between 400,000 and 5000,00 coulombs, while an equal and positive charge resides in the atmosphere.

“There is about a 300 000 volt (V) potential difference between the Earth’s surface and the electrosphere, which gives an average electric field strength of about 6 V/metre (m) throughout the atmosphere. Near the surface, the fine-weather electric field strength is about 100 V/m..” Average height of a man is 6 feet or 2 meters so 100 V/m x 2 meters = 200 Volts 6 feet off the ground.

Wikipedia also states that Earth’s atmosphere is electrically charged. They disclose this with this statement – “The measurements of atmospheric electricity can be seen as measurements of difference of potential between a point of the Earth’s surface, and a point somewhere in the air above it. The atmosphere in different regions is often found to be at different local potentials, which differ from that of the earth sometimes even by as much as 3000 Volts within 100 feet (30 m). The electrostatic field and the difference of potential of the earth field according to investigations, is in summer about 60 to 100 volts and in winter 300 to 500 volts per meter of difference in height, a simple calculation gives the result that when such a collector is arranged for example on the ground, and a second one is mounted vertically over it at a distance of 2000 meters and both are connected by a conducting cable, there is a difference in potential in summer of about 2,000,000 volts and in winter even of 6,000,000 volts and more.” http://en.wikipedia.org/wiki/Atmospheric_electricity

What both Wikipedia and the Canadian government are stating is exactly what Nikola Tesla and Dr. Thomas Henry Moray stated 80 years ago and tried to educate the World – that we are surrounded by a sea of energy. We need only know how to tap into it to power everything we use. Tesla knew how and powered an electric motor in an automobile.  Moray successfully tapped into this free energy and powered thirty-five 100-watt lamps and a 1200-watt iron simultaneously.

Solar panel manufacturers need only to replicate what Tesla and Moray did and their panels will be far more efficient (harness a lot more free sun energy) than they are now.  A simple redesign of the solar panel can tap into 200 volts positive of free, unlimited, unmetered and carbon-free electrical energy.  The biggest flaw in all solar panels is the reflective glass.  Solar panels reflect most of that free EM energy.  There is more deflecting glass and dielectric insulating material than energy conducting material in today’s solar cells. Very thin strips of conducting material can of course only harness very little energy. Replace the thin strips with thin sheets and you increase the inductance of the solar cells. A thin sheet of conducting material has a much greater inductance than very thin strips.

The law of reflection says that for specular reflection the angle at which the wave is incident on the surface equals the angle at which it is reflected. Solar panels are mirrors – reflecting the sun energy. A mirror provides the most common model for specular light (mirror-like) reflection, and typically consists of a glass sheet with a metallic coating where the reflection actually occurs. Reflection is enhanced by the metal of the solar cells by suppression of wave propagation beyond their skin depths. Reflection also occurs at the surface of transparent media, such as the glass top of all solar panels. Because all solar panels are stationary in relation to the moving sun energy is predominately being reflected and the remainder is refracted. Energy is only being absorbed in one incident only – when the sun is “exactly” perpendicular to the solar panel’ reflective surface. At all other times sun energy is either being reflected or refracted.

The solution is to make a electromagnetic (EM) energy receiver than doesn’t reflect at all. Like my design – the EM energy receiving antenna (see article’s image) . The m2 (meter square) EM antenna surface is a non-reflective matt black. Black absorbs the light and when it does this it is also absorbing energy – throughout the day. It doesn’t matter where the sunlight is coming from matt black will not reflect the free electromagnetic energy. Black absorbs all the visible electromagnetic radiation that falls on it.  This summer I plan on replicating Telsa and Moray’s success using another type of antenna – a m2 Microcell™.  All financial contributions are greatly appreciated.

Offshore oil rigs flare the energy equivalent of 40 to 60 billion gallons of gasoline each year.

How much does 1 gallon of liquid gasoline displace as a vapor? The saturated vapor volume of an average gallon of liquid gasoline when fully evaporated is 160 gallons of vapor at 60° F and sea level. When you convert 1 gallon of gasoline into 160 gallons of highly combustible fuel vapor you increase your nation’s fuel supply by 16,000% (16,000% of 1 is 160). If you paid $5 for just one gallon of liquid gasoline you would actually only be paying $0.03 (3 cents) per gallon of fuel vapor.

How can you convert 1 gallon of liquid gasoline fuel into 160 gallons of gasoline vapor and increase your fuel supply by 16,000%?  There are two known and proven ways to convert liquid gasoline into fuel vapor.  One is to heat the liquid fuel before it enters the engine.  The other is using ultrasonic nebulizer technology.

If liquid fuel is heated to a temperature of 450 degrees F, the fuel is fractionalized by catalytic cracking and converted to smaller light molecular hydrocarbons, methane and methanol. Where can you get this kind of heat in order to fractionalize liquid fuel? Manifolds and exhaust pipes can reach temperatures of 500°F to 1000°F.

It is a well documented fact that air pollution from internal combustion engines is caused by unburned carbon fuel. Today, all gasoline powered vehicles burn only finely divided particles or droplets that are sprayed from the carburetor or fuel injectors, into the engine cylinders. This is a very wasteful process of converting gasoline or diesel to energy. 20-30 % efficiency at best. Converting liquid gasoline to a gasoline vapors will easily give 5 times the mpg and near zero emissions.

In the old days engines ran very lean as demonstrated by the fuel needle valve. In the old days just 1 tiny needle valve did the work of 6 to 8 fuel injectors. In the old days all engines ran on a much leaner amount of (less) fuel.

All internal combustion engines were made to run on highly combustible vapor, not liquid. It is well known that fuel-lean running improves the fuel efficiency of all vehicles. In the old days, under cruising conditions, the carburetor engines always ran lean – about 15% excess air. In the old days liquid fuel was reduced (made leaner) to finely divided particles or droplets before they enter the combustion chamber above the pistons. The carburetors reduced the liquid fuel into a very lean fuel mist before the fuel entered the combustion chamber above the pistons. Very high gas mileage is achieved by simply reducing liquid fuel into what all combustion engine need – gas vapor.

Vapor burns much cleaner than gasoline and has a higher octane rating. A lean running engine (ie, an engine using more air than fuel) has a cooler combustion process than the typical ECM engine with a preset (never deviating) chemically correct mixture of 14.6 air : 1 fuel. Running cooler is also better for the engines. Cooler running engines means a reduction in heat damage and failure.

In the early 1930s, Charles Nelson Pogue equipped a Ford V8 coupe with a vapor carburetor he designed and built and got over 200 MPG. He drove the V8 Ford from Winnipeg, Manitoba Canada to Vancouver B.C. Canada. He traveled 1879.5 miles on just 14.5 gallons of gasoline (the entire distance on just 3/4 of a 20 gallon tank of fuel) A standard carburetor used 106.5 gallons (or five, 20 gallon tanks of fuel) on the same trip.

In 1977, Tom Ogle demonstrated a 351 ci. Ford getting over 100 miles per gallon. He used a multiple fuel vaporizing system that had a 3 gallon tank. His system used heat to vaporize the liquid fuel. He received patent number 4,177,779 on Dec. 11, 1979, which described “A fuel economy system for an internal combustion engine which, when installed in a motor vehicle, obviates the need for a conventional carburetor, fuel pump and gasoline tank. The system operates by using the engine vacuum to draw fuel vapors from a vapor tank through a vapor conduit to a vapor equalizer which is positioned directly over the intake manifold of the engine.”

An ultrasonic nebulizer can also convert liquid fuel into a vapor. Liquids such as water acids, salt solutions, fuels, acetones, ketones, etc., can be atomized (to convert a substance into very fine particles or droplets). Ultrasonic atomizing is carried out by focusing ultrasonic energy onto a liquid surface and by scattering liquid particles by the energy.

Vapor volume of a liquid is the number of cubic feet of vapor resulting from the complete evaporation of the liquid. The vapor volume depends on parameters of density, temperature, pressure and molecular weight which is affected by the variety of formulas for gasoline that is comprised of a wide range of hydrocarbons.

Using a common industrial formula: one liquid gallon = [(8.31) x (SG) x (387 cu ft)] / (MW) Where:

8.31 = pounds in a gallon of water
SG = specific gravity of liquid being vaporized
387 = At standard conditions, one pound-molecular weight of a material will evaporate to fill 387 cubic feet of space.
MW= molecular weight of liquid being vaporized

Using the approximate gasoline constants:

One liquid gallon of gasoline = [(8.31 pounds in a gallon of water) x (.70 approx. specific gravity of gasoline) x (387 cu ft)] / (105 molecular weight of average gasoline) = 21.4 cubic feet of vapor volume. There is 7.481 U.S. gallons in one cubic foot. Therefore one liquid gallon of gasoline = (21.4 cubic feet) x (7.481) = 160.4 gallons of saturated gasoline vapor. The vapor volume will vary based on the specific formulation of gasoline, pressure, and temperature. Ultrasonic nebulizer technology makes it possible to convert 1 gallon of gasoline into 160 gallons of highly combustible fuel.

How an ultrasonic nebulizer works to convert a liquid to gas.

Using an ultrasonic nebulizer, liquids in a vessel (such as a fuel tank) sit on top of a vibrating element. and a high intensity ultrasound is omitted. As waves move through the liquid, the liquid will begin to be pushed upward, making a small fountain. Off the surface of this fountain small particles will begin to float above the liquid and appear like smoke. This smoke like appearance is actually very fine vapor. If gasoline was used in this process the small particles that would appear like smoke would be very fine gas vapor. To move the very fine particles a small air flow/gas or vacuum is needed – like a small fuel pump or the vacuum that exists in all combustion engines.

Is the ultrasonic nebulizer technology to convert liquid gasoline into a more abundant (160 times more) vapor gas safe to use? A fog machine reveals that it is safe as a fog machine is a device which emits a dense vapour that appears similar to fog. This artificial fog is most commonly used in professional entertainment applications. Typically, fog is created by vapourizing proprietary water and glycol-based or glycerine-based fluids or through the atomization of mineral oil. Mineral oil is liquid petroleum which is a liquid by-product of the distillation of petroleum to produce gasoline and other petroleum based products from crude oil. If a fog machine can safely and effectively atomize mineral oil – a by-product of oil – then a similar device like an ultrasonic nebulizer can also safely and effectively atomize 1 gallon of gasoline to produce 160 gallons of gasoline vapor.

Who said the reason for high gas prices was because the World is running out of oil? George W. Bush did on March 5th 2008 ~ “We gotta get off oil, American has got to change its habits,”.. “It should be obvious to all, demand has outstripped supply, which makes prices go up.”

President Obama asked Americans in an Oval Office address to accept that the United States is running out of places to drill for oil. President Obama said in his first live televised address from the Oval Office that: “For decades we have known the days of cheap and accessible oil were numbered. For decades we’ve talked and talked about the need to end America’s century long addiction to fossil fuels and for decades we have failed to act with the sense of urgency that this challenge requires.”

The US government’s claim that the World is running out of oil was made to drive up the prices. Higher gas prices means bigger profits for US oil companies. Just look at the Fortune 500 list – Exxon Mobil, Chevron and ConocoPhillips are number 2, 3 and 4 respectively. We are not running out of oil we are being fleeced by the oil companies. With the technology readily available today – specifically liquid to gas vapor technology – they are also wasting oil.

“Governments and the national oil companies are obviously controlling about ninety per cent of the assets. Oil remains fundamentally a government business. While many regions of the world offer great oil opportunities, the Middle East with two thirds of the world’s oil and the lowest cost, is still where the prize ultimately lies, even though companies are anxious for greater access there, progress continues to be slow.” ~ Dick Cheney speech at the Institute of Petroleum Autumn lunch, 1999.

If you were to incorporate this vaporizing technology into the manufacturing of a new ultra fuel efficient car those cars could travel a hundred time farther on one gallon of liquid fuel. On average the fuel efficiency of most cars on the road today is approximately 20 mpg. 20 mpg x liquid to vapor conversion factor of 160 = 3200 mpg.

Design by Paul W Kincaid, editor of frenergy.ca

You can also convert liquid fuel into a vapor simply by modifying the gas tank. You don’t need to drill or cut into the gas tank at all.  You need only to remove and replace the fuel pump / fuel sending unit with a vacuum line and a filtered air intake line that is attached to an aerator you install on the bottom of the gas tank and have it vacuum the accumulated fuel vapor from the top inside of the tank. The filtered air intake (install a check valve between the filter and gas tank to only allow one way air flow to the tank) draws in oxygen into the bottom of the gas tank through the air intake line and attached aerator. The aerator creates very tiny air bubbles that attracts liquid fuel molecules as it rises to the surface of the liquid fuel. Once the air bubbles breaks the surface of the liquid fuel it becomes a gas vapor. This gas vapor is then sucked up (vacuumed) into the vacuum fuel line and feed into the gas combustion engine. This fuel aerator functions much like an aquarium aerator which are used worldwide to oxygenate a fish tank.

You can also add a secondary tank to the system and have the engine vacuum draw the gas vapor from it. You could use a mass produced air compressor type tank as the gas vapor collecting and feed tank. They are already made to withstand very high pressures and the tank will act like a reserve tank when the engine is off. This way you will always have a good supply of gas vapor to draw upon.

Oil, natural gas and wood prices keeping you in the cold and in the poor house?  Want to save money on your electrical utility bill and still keep your house warm?  You can heat your home, apartment and cottage without buying any oil, natural gas or wood and lower your electrical bill at the same time.  All you need is a wood or propane stove, a thermostat, some electrical wiring, an electrical power cord and a mass produced stove element.  Have the cooking element installed inside the wood or propane stove.  In the middle of the stove where you would normally stack wood to burn.

What you are building is a cooking element heater.  An oven if you prefer.  A lot more heat is generated from a cooking element than from any baseboard or portable heater.  That is why you install the element inside a mass produced wood or propane stove.  To prevent a fire.   You need to install a thermostat to the system to control the room temperature.  A thermostat will turn off the cooking element when the desired room temperature is reached.   It will turn it back on “automatically” when the temperature drops below the desired room temperature.

Have you ever noticed that the kitchen is always the warmest room in your house, especially around meal times?  Your cooking stove produces a lot of heat when you cook your meals.  Enough heat to boil water and burn meat to a crisp.  Your baseboard heater can never boil water or cook food even though they use a lot more energy than a cooking element.

With this system you need  to only power one heating element not a half dozen baseboard heater heating elements.  When you incorporate a fan into the system the hot heat from the stove will be forced throughout your home.  A fan makes this system into a forced air furnace.  A system with a 1000 watt cooking element installed will generate more heat than a half dozen 1500 watt baseboard heaters, at a fraction of the cost.  A half dozen 1500 watts baseboard heaters will need to consume 9000 watts of electricity whereas a 1000 watt cooking element forced air furnace will only consume 1000 watts of electricity.  Do you see the savings?

This system produces a lot more heat than any electric fireplace or electric stove manufactured today.  A lot cheaper to build too.  If you incorporate the Drive-Charge ™ self-sustaining electric generator into it, the cost of electricity will be practically nil.

If you already have a wood or propane stove the cost of building one of these is drastically reduced.  If you don’t have either you can buy one for cheap through for sale ads or you can buy a new one and get many years of use from it.  Unlike when you burn wood or propane you don’t need a chimney or stove pipe.  There is no ash produced so the inside will always be carbon soot free for years.  You don’t need carbon monoxide detectors either. You can place these stoves anywhere in the house.

Something to think about when you are going over you wood, oil, or natural gas bills.  It is cheaper than all of them.  It produces zero carbon emissions.  It isn’t toxic.  It won’t add to global warming and you won’t get sick or dye from using it as there are no toxic fumes produced.

As an extra bonus you can also cook food in and on it.  Install an oven rack inside and above the cooking element and as you heat your home, apartment or cottage you can also cook pizza, chicken, fish, a roast, a turkey, a casserole and even bake bread.

A hydrogen fuel cell is nothing more than a redesigned car battery without the battery acid

Free natural gas is available for everyone living near water. The natural gas known as hydrogen can be generated from water – tap water, sea water, drain water, any water. Water is also known as H2O or Hydrogen and Oxygen. Water can easily be split (fissioned) into zero emission hydrogen fuel using a simple method called electrolysis.

The technology of using water as a hydrogen fuel isn’t new as claimed today by most major newspapers and cable networks. The technology was patented and demonstrated by Stanley Myers in a 1990 US Patent 5149407 – Process and apparatus for the production of fuel gas and the enhanced release of thermal energy from such gas – “Water molecules are broken down into hydrogen and oxygen gas atoms in a capacitive cell by a polarization and resonance process dependent upon the dielectric properties of water and water molecules. The gas atoms are thereafter ionized or otherwise energized and thermally combusted to release a degree of energy greater than that of combustion of the gas in ambient air.”

What Stanley Myers did was use electrolysis of water to separate the bond between the hydrogen and oxygen gas in water (H₂O) and produced a highly combustible and clean burning hydrogen gas fuel. Electrolysis of water is the splitting of water (H₂O) into oxygen (O) and hydrogen gas (H₂) due to an electric current being passed through the water.  An electrical power source (solar panel, car battery) is connected to two electrodes, or two plates (typically made from some inert metal such as platinum or stainless steel) which are placed in the water. Hydrogen gas will rise from the cathode (the negatively charged electrode, where electrons enter the water), and oxygen gas will rise at the anode (the positively charged electrode).

Does the accompanying article image look familiar to you? It should. It is a CAD (computer aided design) representation of a mass produced auto part that can be found in the engine compartment of every gas combustion engine vehicle ever made. It is a car battery. Car batteries have more than enough stored energy to perform electrolysis of water as you drive. A car battery can also be used as the hydrogen fuel cell – where water is split into a hydrogen fuel gas.

Most car batteries are lead-acid batteries. Each cell has an electrolytic solution of sulfuric acid (H2SO4) and water. Newer vehicles have more sophisticated batteries of the nickel-metal hydride variety. The electrolyte in them is generally potassium hydroxide (KOH) or a similar alkaline hydroxide. You can order a car battery with no electrolytic solution or any liquid whatsoever. A new dry car battery can be easily made into a hydrogen fuel cell. It already has everything you need built in to start the electrolysis of water and start producing your own hydrogen fuel for your car or truck. It has a positive (anode) and negative (cathode) posts needed to apply an electrical current and split water into hydrogen and oxygen gas using electrolysis of water. It also has several plates already installed within it from which hydrogen gas bubbles will form off of. You need only to add an electrolyte other than the usual acid in order to make the hydrogen fuel cell more efficient – produce enough hydrogen gas to run you vehicle’s engine. Sea salt is a very good electrolyte but it is very corrosive and can produce brown gas instead of clean burning hydrogen gas. Baking soda is a very good electrolyte.

In electrolysis of water a very small electrical current is passed between two electrodes submerged in water. Electrolysis of water will begin with a minimum of 1.2 volts and will increase in rate as the voltage is increased.  Sources of electrical current that can be used in the electrolysis of water – car battery (12 volts), solar panel (5-15 watts), flashlight battery (1.5 volts), cell phone battery (3.7 volts). 12 volts (just 10% or 1/10 the electrical power needed to power the toxic fluorescent lights which requires 120 volts to operate) would produce more than enough hydrogen fuel to power a gas combustion engine like a portable electrical power generator. The hydrogen gas from water can also be used to fuel gas stoves, gas fireplaces, gas barbecues and gas home heating furnaces.  Hydrogen gas from water produces no toxic carbon emissions.  It is a carbon free, environmentally friendly and unmetered fuel.

Don’t be fooled by news stories claiming a new hydrogen fuel source has been developed by the auto makers. Hydrogen fuel has been available to mankind since the stone ages. You just weren’t told it existed because they haven’t figured out how to charge you for something that you can produce yourself.

The above video was filmed in Uganda, Africa.   The construction video shows us just how easy it is to build your own backyard natural gas plant.  Daily gas production capacity of the above constructed digester is 2.6 cubic meters (time stamp 3:23).  That is equivalent to 2600 liters or 16.4  barrels of oil or 687 US liquid gallons.  For comparison an empty 20 lb barbecue propane tank will hold about 4.7 gallons of propane. The natural gas generated is called biogas and it can be used to heat your home, cook your food and power gas electric generators.

In the US and Canada you can use your existing prefab concrete or plastic septic tank and produce your own free supply of natural gas and fuel your home 24/7 and 365 days a year.  Just bury a sealed plastic drum, barrel or tank on top of the septic tank and run a plastic tube (mass produced flexible plumbing tubing) from the top of your septic tank to the buried sealed plastic drum, barrel or tank. Run a pipe from the top of the collector to just above ground height. Attach a gas regulator value (like the ones used for barbecues) to the top of pipe to control the gas flow. Fill in with dirt and let mother nature generate a lifetime supply of free ecofriendly natural gas.

Free natural gas is also available for people living near water. The natural gas known as hydrogen can be generated from water – tap water, sea water, drain water, any water. Water (H2O) can easily be split (fissioned) into zero emission hydrogen gas using a simple method called electrolysis. In electrolysis of water a very small electrical current (electrolysis of water will begin around a minimum of 1.2 volts and will increase in rate as the voltage is increased) is passed between two electrodes submerged in water. Hydrogen gas accumulates at the cathode (negative electrode) and oxygen gas at the anode (positive electrode). Sources of electrical current that can be used in the electrolysis of water – car battery (12 volts), solar panel (5-15 watts), flashlight battery (1.5 volts), cell phone battery (3.7 volts). The hydrogen gas from water can be used to fuel gas stoves, gas fireplaces, gas generators, barbecues and gas home heating furnaces.

The World has been using free unmetered biogas for over 200 years. In the days before electricity, biogas was drawn from the underground sewer pipes in London and burned in street lamps called “gaslights.” Today, in many parts of the world, biogas is used to heat and light homes, to cook, and even to fuel buses. Biogas is already being collected from large scale sources such as landfills, livestock barns, and through small domestic or community systems in many villages – like in Uganda, Pakistan, India, and in Afghanistan.

Yes, even in US occupied Afghanistan this free renewable natural gas fuel is being utilized. Overseen by the US Army. I guess the proverb “if you can’t beat them, join them” is the order of the day.

It is ironic that the US Army would be involved in building projects that taps into this free and infinite supply of renewable natural gas fuel. The US government’s war against Afghanistan was to remove the Taliban in order for the US to build and control the Trans-Afghanistan Pipeline (TAP or TAPI), a natural gas pipeline that was to transport Caspian Sea natural gas from Turkmenistan through Afghanistan into Pakistan and then to India.

On FEBRUARY 12, 1998, US oil giant Unocal (on August 10, 2005, Unocal merged with Chevron) petitioned the US government to overthrow the Afghan Taliban government to build a US controlled Trans-Afghan gas pipeline – “From the outset, we have made it clear that construction of the pipeline we have proposed across Afghanistan could not begin until a recognized government is in place that has the confidence of governments, lenders, and our company.” ~ Unicol stated.

More than 11 quintillion barrels of eco friendly hydrogen fuel has been discovered off New Brunswick, Canada. Enough clean energy fuel to fuel the entire World for millenniums. Not a drop of fresh drinking water or toxic chemicals are needed to recover this high grade, clean burning fuel. This hydrogen fuel produces no harmful by-products upon combustion. This hydrogen gas fuel has no environmental impact. Fresh drinking water isn’t contaminated. The soil isn’t contaminated, nor is the air, or oceans. When this hydrogen fuel is burnt it releases energy and the only bi-product left is desalinated water and pure clean oxygen.

New Brunswick isn’t the only place on Earth with access to this ultra clean burning and cheaply obtainable fuel supply. The entire east and west coasts of Canada, the United States, Mexico, South American, the UK, Spain, Greece, Italy, China, Japan, Australia and Africa have access to this oceans of fuel supply. The fuel is so plentiful you can scoop it up with a bucket. No drilling is required. No processing is required. Absolutely no fresh water wasting and contaminating fracking is required. No fresh water is needed to get at it or process it. No environmental assessments are ever required. Most importantly there is absolutely zero emissions from burning it and its free for the taking.

Scientists have long ago discovered that water can easily be converted into a zero emission hydrogen gas fuel. All it takes is a few volts of solar, antenna radiant energy harnessed (T. Henry / Nikola Tesla) or wind generated electricity to split (cold fission) water into the ultra clean burning and environmentally friendly hydrogen gas fuel and oxygen.

Rustum Roy of Pennsylvania State University verified in 2007 that simple radio waves can split water into its components, allowing the resulting freed hydrogen and oxygen to catch fire.

Water covers 71% the Earth’s surface and the oceans contain 97.2% of Earth’s water. There are 343 quintillion gallons or 11 quintillion barrels of water in our oceans. All that water is composed of two gases – Oxygen and Hydrogen. Water is H2O which means 2 parts hydrogen to 1 part Oxygen. Oxygen is what we all breath, including the engines in our vehicles. Hydrogen is the most abundant of the chemical elements, constituting roughly 75% of the universe’s elemental mass. Hydrogen is also a very flammable, zero emission, gas. That makes hydrogen in the water a viable green fuel source.

So why haven’t we been using water as our main fuel source? Because it is essentially a free fuel. Governments can’t sell water or export what they have to other countries. It is actually illegal for a food service establishment to charge for tap water? You pay only if you ask for bottled water and you are not paying for the water you are paying for the plastic bottle. It is also illegal for any Canadian person or corporation to export Canada’s fresh water. For bottled water, what you are being charged a fee for and taxed on is the bottle and now they’ve added another tax called bottle deposit.

Water as a fuel is obtained for free, by the barrel, from rain, from rivers, lakes, streams, ponds, oceans, seas and with a little ingenuity can be collected from condensation. Anyone can collect water for free. How long will this ultra clean fuel supply last? How old is man? Collecting water for free began with the first man and woman. We have been collecting and using water ever since.

Once you have water how do you turn it into a free fuel? Is isn’t as hard as they (government and greedy gas and oil corporations) say it is. Stanley Meyers (died suddenly on March 21, 1998 after attending a dinner celebrating his successful demonstration of his water fuel cell to the U.S. military) proved how easy it is. Rustum Roy (died soon after on August 26, 2010) proved how easy it is. John S. Kanzius (a scientist who successfully cured cancer with radio waves – using his patented Kanzius RF Therapy. Died in 2009 of pneumonia induced by the deadly chemotherapy) proved how easy it is. I, the editor of this website, owner of www.fuelreducer.com and www.frenergy.ca, Paul W Kincaid, has also demonstrated how easy it is.

The above short video (clicking noise you hear is me pressing the zoom button on the Nokia cell phone. Mute the sound to get rid of the noise) demonstrates just how easy it is to fuel the World using sea water. Sea salt was added to tap water to cause the electrolysis fuel cell to split water (H2O) into hydrogen and oxygen gas. No heat was added to split water into hydrogen and oxygen. The water fuel cell is cold fission.

My first attempt (years ago) used tap water with sea salt added. I discovered that sea salt was the catalyst that made the whole system work. Using just plain old tap water didn’t give the results I wanted you to see. Water being separated into its gaseous state – clean burning hydrogen fuel and oxygen. I also discovered that baking soda and brewers yeast are also catalysts.

The water fuel cell in this video was made using a recycled plastic peanut butter jar, 2 metal Kabobs skewers, a piece of metal mesh and a pneumatic fitting (to allow the gas to escape and prevent the peanut butter jar from exploding as it did in my first attempt which luckily only caused hearing loss for a few hours).

A store bought digital meter was attached to record the voltage input from the Canadian Tire solar panel. The solar panel was used to apply a very small amount of current to the cell’s terminals and cause the water to break apart into its hydrogen and oxygen state. In the video you can see bubbles rising off of the cell’s metal Kabobs skewers. The bubbles quickly began floating to the top of the water. As you can see in the video there were at times a white cloud of bubbles rising off of the terminals. The amount of gas created from the splitting of the water was greater when the sun rays were unrestricted by clouds. In this video you can also see that the water remained clear at the bottom and middle and becoming white at the top of the water.

I was asked to put the lid of the peanut butter jar on tight and demonstrate how quickly water is easily converted to a hydrogen fuel but because of past experiences I chose not to. The cell would have exploded as a result of the hydrogen and oxygen gas buildup in the tightly sealed container.

I am making no claim whatsoever that the H2O fuel cell is a cold fusion device, it is a cold fission device. The definition of fission is – splitting or breaking up into “parts”. The water fuel cell demonstrated in the video uses very little energy to break the bond between the oxygen and hydrogen that makes up water.

There are no environmental side effects (zero carbon emissions, zero toxicity) associated with burning hydrogen oxygen fuel. When we separate the hydrogen (H2) from the water (H2O) we are left with Oxygen. Something we and every other living creature on Earth needs to live.

Sea water from the New Brunswick and U.S. East Coast can be used to fuel barbecues, gas stoves, gas fireplaces, electrical power generators, gas lamps, gas heaters, and gas furnaces.

Using sea water as a cooking, heating and electrical power generating fuel and using the drive-charge electric motor to power our vehicles can get the World off oil, forever. No more fracking. No more global warming. No more toxic carbon pollution. No more city smog. No more oil related diseases. No more devastating oil spills. No more wars to control and meter oil. No more murdering of the leaders of oil rich countries (Iraq’s Saddam Hussein and Libya’s Muammar Gaddafi) and mass murdering of the people of those oil rich countries by the United States government.

There is an antimicrobial apparatus that can easily be constructed to kill 99% of all airborne and surface virus and bacteria simply by passing objects and people through it.  Best of all, it does this without using any toxic chemical laden pharmaceutical drugs, lotions or aerosol sprays.  It is already used in one form or another at water sanitizing and sewage treatment facilities, at bio-weapons military facilities, at government bio-hazard containment facilities and in tanning salons but most likely will never be used in hospitals or medical clinics.

Municipal water and sewage treatment facilities use this technology to treat water and sewage because it is very effective at killing virtually all disease causing microorganisms and at a fraction of the cost of using toxic chemicals.  Military bio-weapons facilities uses this technology to decontaminate their personnel as it also instantly kills man made viruses.  Government facilities keep life threatening bio-hazards locked up in rooms that were built using this technology.  Tanning salons make money using this technolgy.  But, hospitals and medical clinics won’t use this techonlogy because it could put them out of their multi $billion business.

What is already used globally except in hospitals and medical clinics?  UV (Ultraviolet) lights.  UV lights have proven time and again to be very effective in killing 99% of all surface and airborne virus. Ultraviolet light is electromagnetic radiation with wavelengths shorter than visible light. UV can be separated into various ranges, with short range UV (UVC) considered “germicidal UV.” At certain wavelengths UV is mutagenic to bacteria, viruses and other micro-organisms. At a wavelength of 2,537 Angstroms (254 nm) UV light will break the molecular bonds within micro-organismal DNA, producing thymine dimers in their DNA thereby destroying them, rendering them harmless or prohibiting growth and reproduction. It is a process similar to the UV effect of the Sun’s longer wavelengths (UVB) on humans – sunburn. Micro-organisms have less protection from UV and cannot survive prolonged exposure to it. UVB exposure is of utmost importance to humans as the main source of vitamin D comes from exposure to the sun’s UVB rays. UVB exposure synthesize enormous amounts of natural Vitamin D from cholesterol in your skin.

Because UV is very effective in killing bacteria, viruses and other micro-organisms UV water filtration systems are now being sold for use in your home and businesses.  Tap water is filtered using very inexpensive UV lights.  Water quality tests proves unequivocally that UV lights are very effective in killing as much as 99% of all water borne viruses and bacteria.  At military facilities that manufacture bio-weapons UV lights are essential for keeping the life threatening viruses contained and confined to their labs.  Tanning salons uses UV technology for another reason – in their tanning beds.

If UV lights are so effective in killing surface and airborne viruses and bacteria why doesn’t government force hospitals, medical clinics and senior special care facilities to install them at all of their entrances?  Governments would after all save $billions every year just by using this technology.  Hospitals, medical clinics and senior special care homes are already required by government to provide anti-viral sanitation lotions to people entering their facilities, why not go further and require UV sanitation stations?

Actually we know why hospitals, medical clinics and senior special care facilities are not making a fuss about being forced to provide sanitation lotions.  The lotions actually make people visiting their facilities sick as the alcohol and oil based lotion strips away the anti-viral skin oils that are made by your body as a defense (immunity) against disease and illness causing viruses and bacteria.  The main ingredient of the lotions is a carcinogenic (cancer causing) crude oil derivative oil, so like carcinogenic sunscreen lotions (also made from crude oil) they cause cancer.

Countertop UV antibacterial hand air sanitizer ©2012

As I mentioned before, governments would save $billions in health care costs each year if this UV technology was used in hospitals, medical clinics and senior special care facilities.  Fewer people would become sick from exposure to airborne and surface bacteria, viruses and other micro-organisms.  People making hospital, medical clinic or senior special care facility visits would no longer spread these bacteria, viruses and other micro-organisms throughout the general population.  Pandemics would be prevented simply by utilizing a UV screening system at all hospitals, medical clinics and senior special care facilities.

Hospitals and medical clinics protect their multi $billion ill-health business by fraudulently declaring that UV exposure is very harmful and yet they inject people and expose people with very toxic and lethal chemicals and radiation.  Vaccines contains automotive anti-freeze, mercury, aluminum, and a host of other very harmful chemicals.  The heart patch Warfarin is rat poison.  X-rays, MRI and Cat scans exposes people to high levels of concentrated cancer causing radiation – levels equivalent to an exposure to a dirty bomb. People lose their hair, become very sick and develop tumors and lesions not because of cancer but because of the acute radiation exposure hospitals submitted them to.

Why didn’t the swine flu kill millions in 2009 as the CDC, the UN’s WHO and Obama claimed it would?  Because the Swine Flu virus, the Avian Flu Virus and the H5N1 Virus are all easily killed by exposure to UV rays.  UV technology mimics the Sun.  Sun UV exposure is essential for mankind to stay healthy.  Lack of Sun UV exposure is what makes us sick.  Seniors and people who work and play indoors all day are the only ones who get sick.  As we get older we tend to stay indoors more and that bad habit is what makes us sick.  Seniors especially spend most of their last remaining years indoors and by doing so they are inadvertently shortening their own life span. Get out and expose themselves to the Sun’s UV light and they will become healthy again and live longer too.

How easy is it to start saving $billions in health care costs and at the same prevent disease and illness?  As simple as building and installing a decontamination entranceway like the one in this article’s image and video, in every hospital, medical clinic and senior special care facility.  The UV entrance kills and quarantines airborne and surface viruses and bacteria as a person enters or leaves a virus and bacteria infested facility like a hospital, medical clinic and senior special care facility.  It is 100% more effective than just hand lotions because the UV entranceway kills the viruses and bacteria on the entire surface area of a person – from head to toes, front, back and sides.